AutoCAD: The License manager is not functioning or is improperly installed (Part 3)

Recently I was in an installation support call with a customer that was getting the above message after installing AutoCAD 2018...
I tried everything listed in these articles:

• AutoCAD: The License manager is not functioning or is improperly installed

• AutoCAD: The License manager is not functioning or is improperly installed(Part 2)

• Did a full Clean Uninstall.

None of those things worked. 

Finally what it works was, completely removing C++ from the machine through the Control Panel and installing them again from the software installation folder (my case BDSP 2018):

C:\Autodesk\(Autodesk_Software)\3rdParty\x86\VCRedist  
Install each one of them top to bottom 
C:\Autodesk\(Autodesk_Software)\3rdParty\x64\VCRedist
Install each one of them top to bottom

After that everything worked as expected.
Thank you Sebastian Guevara from the Autodesk Installation & Licensing Department

Working with SketchUp Vs FormIt file types and InfraWorks...

Have you ever wonder why if you import an FBX file from any of the available sources like SketchUp, FormIt, any AutoCAD Based software, Revit, Navis to name some of them in InfraWorks regardless of the file units the results are all over the place, sometimes it works, sometimes it doesn't, but must of the time the object or objects are in the wrong size...???? 
Well, I took the time to do some comparisons between an export from AutoCAD, FormIt, and SketchUp to the most used file formats Collada (.DAE), .FBX and .OBJ and the way they behave when you import them in InfraWorks as a 3D Models or if you create a 3D Model Style with the same file types...
I worked with a 10-foot Cube, simple and symmetrical geometry for testing porpuses.
Here are my findings...
If you import the same Cube created and exported out from the above-mentioned software into InfraWorks and configure the files as a 3D Models, this is what you get...

Now using the same files side by side as 3D Models vs 3D Model Styles:
- Exported from AutoCAD C3D as an FBX

- Exported from SketchUp and FormIt as an FBX

 - Exported from SketchUp as a Collada (.DAE)

 - Exported from FormIt as a Collada (.DAE)...

Please be aware that I am ONLY making a comparason on the behavior of the objects size wise, none of the examples above include textures, that is another subject ... ;)
Hope this will help you to get a better picture of how to work with the different file types and the software that create them...
Cheers!

How to edit the Curb and Gutter Component Road Dimensions in InfraWorks

I was asked if it was possible to edit the dimensions of the Curb and Gutter on the component road because those parameters show grayed out from within InfraWorks and the dimensions needed to be like a Type F Curve and Gutter, as shown below…

 

Here it is how you can make this work…

Go to:

C:\ProgramData\Autodesk\InfraWorks\LocalLibrary\Styles\ComponentDefinition

And look for the file called Curb & Gutter.ACItem (always make a copy of the original in case something goes wrong and rename it Curb & Gutter.ACItem.bak). 

Select the file, right click on it and go to Edit. This will open the file on the Notepad.

Please note that the parameters on this file are in meters, so conversion will be needed to resize this properly.

Once you are there, make the changes accordingly, this image will illustrate this better…

Each parameter is represented with a different color, the corresponding units are located at the left and the conversion to meters is shown between the brackets.

After making your changes, save the file, you will need to save it in a temporary location like the desktop and then move it back to the original location:

C:\ProgramData\Autodesk\InfraWorks\LocalLibrary\Styles\ComponentDefinition

Restart InfraWorks, open your model and check the changes you made…

** IMPORTANT ** Be aware once you make these changes you will modify the Curb and Gutter Road Component in InfraWorks, these changes will populate in all your models using the same component. So use this at your discretion.
Hope this will give you some ideas on how to modify other components or making your own component definition, but that may be a topic for another post… ;)

 

Civil 3D Geotechnical Module - How to work with CSV files...

Hello everybody, because I been asked this question a lot in the last 2 weeks I decided to write a post about it... This is what you need to do if you want to work with CSV files to use the Geotechnical Module...
1. The .CSV files must keep that same name configuration

2. The heather of the files has to match exactly what the Geotechnical Module sample file has: name, space, and order.



3. You must have the mandatory fields for each file

If you take care of this everything will work as expected

Geolocation Online Maps Hotfix for ACAD Based Software's 2015 - 2018

Hi everyone... Autodesk just released a hotfix for the Geolocation Online Maps...
Microsoft® is ending support for version 7 of Bing® Maps on June 30th, 2017. This Hotfix will upgrade your version of Bing Maps to version 8 so that you can continue to use the Geolocation Online Map Data feature.
This Hotfix applies to all 32-bit and 64-bit publicly released versions of the following products (including Service Packs and Updates):

• Autodesk AutoCAD 2015, Autodesk AutoCAD LT® 2015, and Autodesk AutoCAD 2015-based vertical products
• Autodesk AutoCAD 2016, Autodesk AutoCAD LT 2016, and Autodesk AutoCAD 2016-based vertical products
• Autodesk AutoCAD 2017, Autodesk AutoCAD LT 2017, and Autodesk AutoCAD 2017-based vertical products
• Autodesk AutoCAD 2018, Autodesk AutoCAD LT 2018, and Autodesk AutoCAD 2018-based vertical products

Downolad and install the hotfix, please remember refear to the README file for detailed instructions.
Autodesk® AutoCAD® 2015-2018 Geolocation Online Map Hotfix

Design Review 2017 Digital Signature issue

Hello everybody... Autodesk released a new version of Design Review, unfortunately, this new version doesn't allow you to add a digital signature to your DWF, for some government entities this is a must have, so if you updated to the new version you will need to rollback to the 2013 version in order to make it work.
Sadly it is no way to get this from the Autodesk website, so here is a link that you can get it from...
Autodesk Design Review 2013 installer

InfraWorks Fence and Barrier Styles

Hi, all... This time I would like to share some InfraWorks Fence and Barrier Styles...
InfraWorks Fence and Barrier Style - Safety Fence

InfraWorks Fence and Barrier Style - Iron Fence

And here is a short video that shows how to create a fence and barrier style using a transparent PNG image...

InfraWorks Mobility Simulation

Hi all... This time I just want it to show you some cool studies that you can do with InfraWorks like Mobility Simulation...
Here is a site and parking done in Civil 3D with a Revit building, and this mobility simulation shows how people gets in and out the building and the parking lot and how traffic gets affected by this new site... Enjoy!

What is New in InfraWorks 2018.0 - Simplified Trees!

Hello, everybody... I just want it to share one of my favorite features of InfraWorks 2018.

If you work with a lot of trees on your model you will love this.... InfraWorks 2018 has now the ability to work with Simplified Trees... Disable realistic trees in your views...
Enabling and disabling realistic trees is a simple toggle switch within your view settings.
Working a simplified style of trees will consume few resources and will allow you to see objects behind the trees.
Take a look at this video courtesy of Autodesk Infraworks Youtube Channel:

What is New in AutoCAD Civil 3D 2018 - Interoperability Between Versions

Hello everyone… With the introduction of a New File Format and Feature Format on Autodesk® AutoCAD® Civil 3D® 2018 Interoperability Between Versions is, as usual, a hot topic…

Here are a couple of things you need to know…
Objects in a drawing saved in AutoCAD Civil 3D 2018 are available only as proxies when the drawing is opened in a prior version of the software.

Within AutoCAD Civil 3D 2018, set the PROXYGRAPHICS drawing setting to 1 to save the graphics with the drawing, otherwise, a bounding box is displayed where the object is located when the drawing is opened in a prior version of the software.

Hope this will help!